|
| الـ MOQ: | 1 |
| السعر: | USD1,000~3,000 one set |
| العبوة القياسية: | الصناديق |
| فترة التسليم: | 8 أيام العمل |
| طريقة الدفع: | D/P ، D/A ، T/T ، Western Union |
| قدرة التوريد: | 1000sets سنة واحدة |
5Ton Electric Chain Hoist with Dual Lifting Speed With Motorized Safe Operation
Core performance enhancement
Super large load capacity
Rated lifting capacity of 5 tons (some models can be overloaded to 125% for a short time), can safely lift heavy machinery, large molds, steel structures, etc.
High-strength alloy lifting chain: using φ13mm~16mm large diameter alloy steel chain (much thicker than φ6mm~10mm of 1-ton model), carburized and quenched, tensile strength ≥800MPa, wear-resistant and impact-resistant.
Reinforced hook: forged alloy steel hook body, standard safety tongue, some models are equipped with rotating hook, convenient for adjusting the load direction.
Powerful drive system
High-power motor: three-phase 380V motor (power about 3kW~7.5kW), providing stable power, smooth start and stop without impact.
Double-stage gear reduction: optimized gearbox design, using hardened gears, transmission efficiency>80%, low noise (<75dB) and good heat dissipation.
Dual speed/frequency conversion control (optional):
Normal speed + micro speed: Micro speed (1/3~1/10 of normal speed) is used for precise positioning (such as equipment installation).
Frequency conversion control: stepless speed regulation, smoother start and stop, and reduced load swing (especially suitable for precision lifting).
Lifting Motor:
Power & Performance
Rated Capacity: 1tons (compatible with standard 220V/380V or customized voltage).
Duty Class: S3 (15-40%) – Suitable for intermittent operation with frequent starts/stops.
Insulation Class: F-grade (heat-resistant, ensuring long service life).
Speed Control Options
Single-speed: Standard fixed-speed operation (e.g., 6.6 m/min).
Dual-speed: Dual-winding motor for precision lifting (e.g., 2.2/6.6 m/min).
Optional VFD Control: Smooth acceleration/deceleration for sensitive loads.
| lifting capacity | 5ton |
| lifting height | 5m |
| lifting speed | 6.6m/min |
| lifting motor | 3.0kW |
| travel speed |
21m/min |
| travel motor | 0.4kW |
| power in | 3phase 220-440V 50/60Hz |
| control | 24/36/48V |
|
|
| الـ MOQ: | 1 |
| السعر: | USD1,000~3,000 one set |
| العبوة القياسية: | الصناديق |
| فترة التسليم: | 8 أيام العمل |
| طريقة الدفع: | D/P ، D/A ، T/T ، Western Union |
| قدرة التوريد: | 1000sets سنة واحدة |
5Ton Electric Chain Hoist with Dual Lifting Speed With Motorized Safe Operation
Core performance enhancement
Super large load capacity
Rated lifting capacity of 5 tons (some models can be overloaded to 125% for a short time), can safely lift heavy machinery, large molds, steel structures, etc.
High-strength alloy lifting chain: using φ13mm~16mm large diameter alloy steel chain (much thicker than φ6mm~10mm of 1-ton model), carburized and quenched, tensile strength ≥800MPa, wear-resistant and impact-resistant.
Reinforced hook: forged alloy steel hook body, standard safety tongue, some models are equipped with rotating hook, convenient for adjusting the load direction.
Powerful drive system
High-power motor: three-phase 380V motor (power about 3kW~7.5kW), providing stable power, smooth start and stop without impact.
Double-stage gear reduction: optimized gearbox design, using hardened gears, transmission efficiency>80%, low noise (<75dB) and good heat dissipation.
Dual speed/frequency conversion control (optional):
Normal speed + micro speed: Micro speed (1/3~1/10 of normal speed) is used for precise positioning (such as equipment installation).
Frequency conversion control: stepless speed regulation, smoother start and stop, and reduced load swing (especially suitable for precision lifting).
Lifting Motor:
Power & Performance
Rated Capacity: 1tons (compatible with standard 220V/380V or customized voltage).
Duty Class: S3 (15-40%) – Suitable for intermittent operation with frequent starts/stops.
Insulation Class: F-grade (heat-resistant, ensuring long service life).
Speed Control Options
Single-speed: Standard fixed-speed operation (e.g., 6.6 m/min).
Dual-speed: Dual-winding motor for precision lifting (e.g., 2.2/6.6 m/min).
Optional VFD Control: Smooth acceleration/deceleration for sensitive loads.
| lifting capacity | 5ton |
| lifting height | 5m |
| lifting speed | 6.6m/min |
| lifting motor | 3.0kW |
| travel speed |
21m/min |
| travel motor | 0.4kW |
| power in | 3phase 220-440V 50/60Hz |
| control | 24/36/48V |
