logo
المنتجات
تفاصيل المنتجات
المنزل > المنتجات >
Single Girder Wire Rope Hoist with and Low Noise Operation for Heavy Duty Lifting Operations

Single Girder Wire Rope Hoist with and Low Noise Operation for Heavy Duty Lifting Operations

الـ MOQ: مجموعة واحدة
السعر: USD1,000-5,000
العبوة القياسية: عبوة صندوق خشبية
فترة التسليم: 20 يوم عمل
طريقة الدفع: Moneygram ، Western Union ، T/T ، D/P ، D/A
قدرة التوريد: 1000 مجموعة سنة واحدة
معلومات مفصلة
مكان المنشأ
الصين
اسم العلامة التجارية
kiwicrane
إصدار الشهادات
ISO、CE
رقم الموديل
VTS
رقم الموديل:
VTS-10
اسم الإنتاج:
الحبل الأسلاك الكهربائية على الطراز الأوروبي رافعة 10T 12M
قدرة الرفع:
10t
رفع الارتفاع:
6-18 م
قوة:
220-460V 50/60Hz 3 مرحلة
الاستخدام:
رفع البناء ، ورافعة التعدين ، رافعة الجسر ، رفع الأم المتحركة
ضمان:
1 سنة
حالة:
جديد
نوع حبال:
حبل الأسلاك
سرعة رفع:
5/0.8M/دقيقة
طلب:
رافع موقع البناء ، مستودع وما إلى ذلك ، استخدام رافعة العارضة الفردية
لون:
أصفر
سرعة السفر:
20/5 م/دقيقة
خطاف:
مزورة الصلب
وصف المنتج

Single Girder Wire Rope Hoist with and Low Noise Operation for Heavy Duty Lifting Operations

 

 European wire rope hoist main parameters table


model   VTW-S 10T
SWL t 10
lifting height m 6-18
lifting speed m/min 0.8/5.0
travel speed m/min 5-20
power in V;HZ 220~460V 50/60Hz
FEM(GB) -- 2m(M5)
lifting motor power KW 1.5/9.5
RPM n/min 430/2900
insulation -- F
production -- IP55
duration -- 40%
rated current   5.17/14.20
lift gear ratio -- 119.8
drum dia mm 268
wire rope -- 11-8*26(WS)+IWRC
travel motor power in KW 2-0.4
RPM n/min 133
insulation -- F
production -- IP55
duration --  
rated current A 2.5
wheel dia mm 125

 

European wire rope hoist description


  1. High Safety

    • Dual Braking System: In addition to the brake built into the motor, a safety brake is usually installed on the low-speed shaft (drum side) as a redundancy backup, significantly increasing safety.

    • Multiple Limit Protections: Standard upper and lower limit switches (helical or counterweight type) prevent overshooting or excessive lowering. An overload limiter is also typically included, automatically cutting off operation when the load exceeds 105% of the rated load, protecting equipment and personnel safety

    • Thermal Protection: The motor has a built-in thermal protection device to prevent motor burnout due to frequent starts and stops or overload

  2. Modular Design and Convenient Maintenance

    • All major components (such as the motor, gearbox, drum, and brake) adopt a modular design.

    • Direct Benefits: Installation, commissioning, maintenance, and spare parts replacement are very convenient, greatly reducing downtime for maintenance.

 

               Single Girder Wire Rope Hoist with and Low Noise Operation for Heavy Duty Lifting Operations 0

 

 Company Introduction   


  Hefei Kiwi Heavy Machinery Co.,ltd is located in Feidong County, Hefei City, Anhui Province. The company was established in 2010. It is a professional manufacturer and service provider of lifting machinery, material handling and various non-standard equipment products. It is committed to the development and research of crane and logistics handling technology. It inherits the advanced European design concept and perfect process flow.

              Single Girder Wire Rope Hoist with and Low Noise Operation for Heavy Duty Lifting Operations 1

المنتجات
تفاصيل المنتجات
Single Girder Wire Rope Hoist with and Low Noise Operation for Heavy Duty Lifting Operations
الـ MOQ: مجموعة واحدة
السعر: USD1,000-5,000
العبوة القياسية: عبوة صندوق خشبية
فترة التسليم: 20 يوم عمل
طريقة الدفع: Moneygram ، Western Union ، T/T ، D/P ، D/A
قدرة التوريد: 1000 مجموعة سنة واحدة
معلومات مفصلة
مكان المنشأ
الصين
اسم العلامة التجارية
kiwicrane
إصدار الشهادات
ISO、CE
رقم الموديل
VTS
رقم الموديل:
VTS-10
اسم الإنتاج:
الحبل الأسلاك الكهربائية على الطراز الأوروبي رافعة 10T 12M
قدرة الرفع:
10t
رفع الارتفاع:
6-18 م
قوة:
220-460V 50/60Hz 3 مرحلة
الاستخدام:
رفع البناء ، ورافعة التعدين ، رافعة الجسر ، رفع الأم المتحركة
ضمان:
1 سنة
حالة:
جديد
نوع حبال:
حبل الأسلاك
سرعة رفع:
5/0.8M/دقيقة
طلب:
رافع موقع البناء ، مستودع وما إلى ذلك ، استخدام رافعة العارضة الفردية
لون:
أصفر
سرعة السفر:
20/5 م/دقيقة
خطاف:
مزورة الصلب
الحد الأدنى لكمية:
مجموعة واحدة
الأسعار:
USD1,000-5,000
تفاصيل التغليف:
عبوة صندوق خشبية
وقت التسليم:
20 يوم عمل
شروط الدفع:
Moneygram ، Western Union ، T/T ، D/P ، D/A
القدرة على العرض:
1000 مجموعة سنة واحدة
وصف المنتج

Single Girder Wire Rope Hoist with and Low Noise Operation for Heavy Duty Lifting Operations

 

 European wire rope hoist main parameters table


model   VTW-S 10T
SWL t 10
lifting height m 6-18
lifting speed m/min 0.8/5.0
travel speed m/min 5-20
power in V;HZ 220~460V 50/60Hz
FEM(GB) -- 2m(M5)
lifting motor power KW 1.5/9.5
RPM n/min 430/2900
insulation -- F
production -- IP55
duration -- 40%
rated current   5.17/14.20
lift gear ratio -- 119.8
drum dia mm 268
wire rope -- 11-8*26(WS)+IWRC
travel motor power in KW 2-0.4
RPM n/min 133
insulation -- F
production -- IP55
duration --  
rated current A 2.5
wheel dia mm 125

 

European wire rope hoist description


  1. High Safety

    • Dual Braking System: In addition to the brake built into the motor, a safety brake is usually installed on the low-speed shaft (drum side) as a redundancy backup, significantly increasing safety.

    • Multiple Limit Protections: Standard upper and lower limit switches (helical or counterweight type) prevent overshooting or excessive lowering. An overload limiter is also typically included, automatically cutting off operation when the load exceeds 105% of the rated load, protecting equipment and personnel safety

    • Thermal Protection: The motor has a built-in thermal protection device to prevent motor burnout due to frequent starts and stops or overload

  2. Modular Design and Convenient Maintenance

    • All major components (such as the motor, gearbox, drum, and brake) adopt a modular design.

    • Direct Benefits: Installation, commissioning, maintenance, and spare parts replacement are very convenient, greatly reducing downtime for maintenance.

 

               Single Girder Wire Rope Hoist with and Low Noise Operation for Heavy Duty Lifting Operations 0

 

 Company Introduction   


  Hefei Kiwi Heavy Machinery Co.,ltd is located in Feidong County, Hefei City, Anhui Province. The company was established in 2010. It is a professional manufacturer and service provider of lifting machinery, material handling and various non-standard equipment products. It is committed to the development and research of crane and logistics handling technology. It inherits the advanced European design concept and perfect process flow.

              Single Girder Wire Rope Hoist with and Low Noise Operation for Heavy Duty Lifting Operations 1

خريطة الموقع |  سياسة الخصوصية | الصين جودة جيدة رافعة كهربائية المورد. حقوق الطبع والنشر © 2025 Hefei Kiwi Heavy Machinery Co., Ltd. جميع الحقوق محفوظة